Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting.

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet-printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups. The rheological properties of treated GelMA inks are evaluated by a piezo-axial vibrator over a wide range of frequencies between 10 and 10 000 Hz. This approach enables to effectively increase the maximum printable polymer concentration from 3% to 10%. Then it is studied how the sonochemical treatment effectively controls the microstructure and mechanical properties of GelMA hydrogel constructs after crosslinking while maintaining its fluid properties within the printable range. The control of mechanical properties of GelMA hydrogels can lead fibroblasts more spreading on the hydrogels. A 3D cell-laden multilayered hydrogel constructs containing layers with different physical properties is fabrictated by using high-resolution inkjet printing. The sonochemical treatment delivers a new path to inkjet bioprinting to build microarchitectures with various physical properties by expanding the range of applicable bioinks.

Dual-gate thin film transistor lactate sensors operating in the subthreshold regime.

Organic thin-film transistors (TFTs) with an electrochemically functionalized sensing gate are promising platforms for wearable health-monitoring technologies because they are light, flexible, and cheap. Achieving both high sensitivity and low power is highly demanding for portable or wearable devices. In this work, we present flexible printed dual-gate (DG) organic TFTs operating in the subthreshold regime with ultralow power and high sensitivity. The subthreshold operation of the gate-modulated TFT-based sensors not only increases the sensitivity but also reduces the power consumption. The DG configuration has deeper depletion and stronger accumulation, thereby further making the subthreshold slope sharper. We integrate an enzymatic lactate-sensing extended-gate electrode into the printed DG TFT and achieve exceptionally high sensitivity (0.77) and ultralow static power consumption (10 nW). Our sensors are successfully demonstrated in physiological lactate monitoring with human saliva. The accuracy of the DG TFT sensing system is as good as that of a high-cost conventional assay. The developed platform can be readily extended to various materials and technologies for high performance wearable sensing applications.

Transfer-Tattoo-Like Cell-Sheet Delivery Induced by Interfacial Cell Migration.

A direct transfer of a cell sheet from a culture surface to a target tissue is introduced. Commercially available, flexible parylene is used as the culture surface, and it is proposed that the UV-treated parylene offers adequate and intermediate levels of cell adhesiveness for both the stable cell attachment during culture and for the efficient cell transfer to a target surface. The versatility of this cell-transfer process is demonstrated with various cell types, including MRC-5, HDFn, HULEC-5a, MC3T3-E1, A549, C2C12 cells, and MDCK-II cells. The novel cell-sheet engineering is based on a mechanism of interfacial cell migration between two surfaces with different adhesion preferences. Monitoring of cytoskeletal dynamics and drug treatments during the cell-transfer process reveals that the interfacial cell migration occurs by utilizing the existing transmembrane proteins on the cell surface to bind to the targeted surface. The re-establishment and reversal of cell polarity after the transfer process are also identified. Its unique capabilities of 3D multilayer stacking, freeform design, and curved surface application are demonstrated. Finally, the therapeutic potential of the cell-sheet delivery system is demonstrated by applying it to cutaneous wound healing and skin-tissue regeneration in mice models.

Effect of Aronia Extract on Collagen Synthesis in Human Skin Cell and Dermal Equivalent.

The regulation of collagen synthesis, which occurs in fibroblasts in the dermal layer, is a key process in dermis regeneration and skin reconstruction. Herein, we investigated whether Aronia melanocarpa extract affects the human skin condition. We focused on type I collagen synthesis using two different types of model systems: a monolayer of cells and a bioprinted 3D dermal equivalent. The Aronia extract showed no cytotoxicity and increased cell proliferation in neonatal human dermal fibroblasts. Treatment with Aronia extract increased the transcription of COL1A1 mRNA in direct proportion to the extract concentration without causing a decrease in COL1A1 mRNA degradation. Additionally, the Aronia extract inhibited the expression of MMP1 and MMP3, and an increase in type I collagen was observed along with a decrease in MMP1 protein. We also fabricated dermal equivalents from type I collagen (the major component of the dermis) and dermal fibroblasts by bioprinting. In the 3D dermis model, the compressive modulus directly affected by collagen synthesis increased in direct proportion to the Aronia extract concentration, and expression levels of MMP1 and MMP3 decreased in exactly inverse proportion to its concentration. The findings that the Aronia extract increases synthesis of type I collagen and decreases MMP1 and MMP3 expression suggest that this extract may be useful for the treatment of damaged or aged skin.

Homogenization of a reaction diffusion equation can explain influenza A virus load data.

We study the influence of spatial heterogeneity on the antiviral activity of mouse embryonic fibroblasts (MEF) infected with influenza A. MEF of type Ube1L-/- are composed of two distinct sub-populations, the strong type that sustains a strong viral infection and the weak type, sustaining a weak viral load. We present new data on the virus load infection of Ube1L-/-, which have been micro-printed in a checker board pattern of different sizes of the inner squares. Surprisingly, the total viral load at one day after inoculation significantly depends on the sizes of the inner squares. We explain this observation by using a reaction diffusion model and we show that mathematical homogenization can explain the observed inhomogeneities. If the individual patches are large, then the growth rate and the carrying capacity will be the arithmetic means of the patches. For finer and finer patches the average growth rate is still the arithmetic mean, however, the carrying capacity uses the harmonic mean. While fitting the PDE to the experimental data, we also predict that a discrepancy in virus load would be unobservable after only half a day. Furthermore, we predict the viral load in different inner squares that had not been measured in our experiment and the travelling distance the virions can reach after one day.

All-Inkjet-Printed 3D Alveolar Barrier Model with Physiologically Relevant Microarchitecture.

With the outbreak of new respiratory viruses and high mortality rates of pulmonary diseases, physiologically relevant models of human respiratory system are urgently needed to study disease pathogenesis, drug efficacy, and pharmaceutics. In this paper, a 3D alveolar barrier model fabricated by printing four human alveolar cell lines, namely, type I and II alveolar cells (NCI-H1703 and NCI-H441), lung fibroblasts (MRC5), and lung microvascular endothelial cells (HULEC-5a) is presented. Automated high-resolution deposition of alveolar cells by drop-on-demand inkjet printing enables to fabricate a three-layered alveolar barrier model with an unprecedented thickness of ≈10 µm. The results show that the 3D structured model better recapitulate the structure, morphologies, and functions of the lung tissue, compared not only to a conventional 2D cell culture model, as expected, but also a 3D non-structured model of a homogeneous mixture of the alveolar cells and collagen. Finally, it is demonstrated that this thin multilayered model reproduce practical tissue-level responses to influenza infection. Drop-on-demand inkjet-printing is an enabling technology for customization, scalable manufacturing, and standardization of their size and growth, and it is believed that this 3D alveolar barrier model can be used as an alternative to traditional test models for pathological and pharmaceutical applications.

Author Correction: Freeform micropatterning of living cells into cell culture medium using direct inkjet printing.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Self-Organization of Fibroblast-Laden 3D Collagen Microstructures from Inkjet-Printed Cell Patterns.

One of the major challenges encountered in engineering complex tissues in vitro is to increase levels of complexity at the micron scale in 3D structures. Here, a strategy to create self-organized 3D collagen microstructures by 2D micropatterning of fibroblasts is developed. Drop-on-demand inkjet printing is used to pattern fibroblast cells on a collagen substrate in pre-designed patterns and with controlled density. It is found that cell-to-ECM interaction promotes cellular self-organization of 3D microstructures on collagen hydrogel, whereas the formation of 3D microstructure is inhibited by disruption of actin polymerization. Using this phenomena, the controlled sizes and morphologies of the 3D collagen microstructures is demonstrated by manipulating the designs of cell patterns and the density of cells. Finally, this technique is applied to build a human skin model with papillary microstructures at the dermo-epidermal junction. This approach to create 3D cell-laden collagen microstructures by cell patterning provides a simple and powerful way to mimic the structures and functions of complex tissues and organs, and can make a contribution to reduce the gap between the human body and in vitro tissue models.

Inkjet-Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures.

Here, a new bioprinting process by combining drop-on-demand inkjet printing with a spray-coating technique, which enables the high-resolution, high-speed, and freeform fabrication of large-scale cell-laden hydrogel structures is reported. Hydrogel structures with various shapes and composed of different materials, including alginate, cellulose nanofiber, and fibrinogen, are fabricated using the inkjet-spray printing. To manufacture cell-friendly hydrogel structures with controllable stiffness, gelatine methacryloyl is saponified to stabilize jet formation and is subsequently mixed with sodium alginate to prepare blend inks. The hydrogels crosslinked from the blend inks are characterized by assessing physical properties including the microstructure and mechanical stiffness and cellular responses including the cell viability, metabolic activity, and functionality of human dermal fibroblasts within the hydrogel. Cell-laden hydrogel structures are generated on a large scale and collagen type I secretion and spreading of cells within the hydrogels are assessed. The results demonstrate that the inkjet-spray printing system will ensure the formation of a cell-laden hydrogel structure with high shape fidelity in a rapid and reliable manner. Ultimately, the proposed printing technique and the blend bioink to be used to fabricate 3D laminated large-scale tissue equivalents that potentially mimic the function of native tissues is expected.

Publisher Correction: Freeform micropatterning of living cells into cell culture medium using direct inkjet printing.

A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.

Freeform micropatterning of living cells into cell culture medium using direct inkjet printing.

Microfabrication methods have widely been used to control the local cellular environment on a micron scale. However, accurately mimicking the complexity of the in vivo tissue architecture while maintaining the freedom of form and design is still a challenge when co-culturing multiple types of cells on the same substrate. For the first time, we present a drop-on-demand inkjet printing method to directly pattern living cells into a cell-friendly liquid environment. High-resolution control of cell location is achieved by precisely optimizing printing parameters with high-speed imaging of cell jetting and impacting behaviors. We demonstrated the capabilities of the direct cell printing method by co-printing different cells into various designs, including complex gradient arrangements. Finally, we applied this technique to investigate the influence of the heterogeneity and geometry of the cell population on the infectivity of seasonal H1N1 influenza virus (PR8) by generating A549 and HeLa cells printed in checkboard patterns of different sizes in a medium-filled culture dish. Direct inkjet cell patterning can be a powerful and versatile tool for both fundamental biology and applied biotechnology.

Drop-on-demand inkjet-based cell printing with 30-µm nozzle diameter for cell-level accuracy.

We present drop-on-demand inkjet-based mammalian cell printing with a 30-µm nozzle diameter for cell-level accuracy. High-speed imaging techniques have been used to analyze the go-and-stop movement of cells inside the nozzle under a pulsed pressure generated by a piezo-actuator and the jet formation after ejection. Patterning of an array of 20 × 20 dots on a glass substrate reveals that each printed drop contains 1.30 cells on average at the cell concentration of 5.0 × 106 cells ml-1 for the very small nozzle, whereas larger nozzles with the diameter of 50 and 80 µm deliver 2.57 and 2.88 cells per drop, respectively. The effects of the size and concentration of printed cells on the number of cells have also been investigated. Furthermore, the effect of the nozzle diameter on printed cells has been evaluated through an examination of viability, proliferation, and morphology of cells by using a live/dead assay kit, CCK-8 assay, and cellular morphology imaging, respectively. We believe that the 30-µm inkjet nozzle can be used for precise cell deposition without any damages to the printed mammalian cells.